| 1 | [ 0.000000] Initializing cgroup subsys cpu |
|---|
| 2 | [ 0.000000] Linux version 3.0.0_xo1.75-20111027.1314.olpc.5eff2cf (kernels@koji2.laptop.org) (gcc version 4.5.1 20101112 (Red Hat 4.5.1-5) (GCC) ) #1 PREEMPT Thu Oct 27 14:48:17 EDT 2011 |
|---|
| 3 | [ 0.000000] CPU: ARMv7 Processor [560f5815] revision 5 (ARMv7), cr=10c5387f |
|---|
| 4 | [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache |
|---|
| 5 | [ 0.000000] Machine: OLPC XO-1.75 |
|---|
| 6 | [ 0.000000] Ignoring unrecognised tag 0x54410008 |
|---|
| 7 | [ 0.000000] OFW detected in memory, cif @ 0xfda34e04: |
|---|
| 8 | [ 0.000000] 0xfd800000 - 0xfdbfffff (4MB) |
|---|
| 9 | [ 0.000000] 0xfdc00000 - 0xfdffffff (4MB) |
|---|
| 10 | [ 0.000000] Reserved memory (67108864 bytes at 0x18000000) |
|---|
| 11 | [ 0.000000] Memory policy: ECC disabled, Data cache writeback |
|---|
| 12 | [ 0.000000] On node 0 totalpages: 112640 |
|---|
| 13 | [ 0.000000] free_area_init_node: node 0, pgdat c04d74cc, node_mem_map c054c000 |
|---|
| 14 | [ 0.000000] Normal zone: 1008 pages used for memmap |
|---|
| 15 | [ 0.000000] Normal zone: 0 pages reserved |
|---|
| 16 | [ 0.000000] Normal zone: 111632 pages, LIFO batch:31 |
|---|
| 17 | [ 0.000000] PROM DT: Built device tree with 28672 bytes of memory. |
|---|
| 18 | [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 |
|---|
| 19 | [ 0.000000] pcpu-alloc: [0] 0 |
|---|
| 20 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 111632 |
|---|
| 21 | [ 0.000000] Kernel command line: console=ttyS2,115200 console=tty0 selinux=0 fbcon=font:SUN12x22 |
|---|
| 22 | [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) |
|---|
| 23 | [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) |
|---|
| 24 | [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) |
|---|
| 25 | [ 0.000000] Memory: 384MB 56MB = 440MB total |
|---|
| 26 | [ 0.000000] Memory: 436864k/436864k available, 79232k reserved, 0K highmem |
|---|
| 27 | [ 0.000000] Virtual kernel memory layout: |
|---|
| 28 | [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) |
|---|
| 29 | [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) |
|---|
| 30 | [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB) |
|---|
| 31 | [ 0.000000] vmalloc : 0xe0000000 - 0xfd600000 ( 470 MB) |
|---|
| 32 | [ 0.000000] lowmem : 0xc0000000 - 0xdf800000 ( 504 MB) |
|---|
| 33 | [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) |
|---|
| 34 | [ 0.000000] .init : 0xc0008000 - 0xc002a000 ( 136 kB) |
|---|
| 35 | [ 0.000000] .text : 0xc002a000 - 0xc04b147c (4638 kB) |
|---|
| 36 | [ 0.000000] .data : 0xc04b2000 - 0xc04da7f8 ( 162 kB) |
|---|
| 37 | [ 0.000000] .bss : 0xc04da81c - 0xc054b330 ( 451 kB) |
|---|
| 38 | [ 0.000000] NR_IRQS:320 nr_irqs:320 320 |
|---|
| 39 | [ 0.000000] sched_clock: 32 bits at 6MHz, resolution 153ns, wraps every 660764ms |
|---|
| 40 | [ 0.000000] Console: colour dummy device 80x30 |
|---|
| 41 | [ 0.000000] console [tty0] enabled |
|---|
| 42 | [ 660.728664] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) |
|---|
| 43 | [ 660.818741] pid_max: default: 32768 minimum: 301 |
|---|
| 44 | [ 660.818741] Mount-cache hash table entries: 512 |
|---|
| 45 | [ 660.819037] CPU: Testing write buffer coherency: ok |
|---|
| 46 | [ 660.821082] devtmpfs: initialized |
|---|
| 47 | [ 660.824086] print_constraints: dummy: |
|---|
| 48 | [ 660.824245] NET: Registered protocol family 16 |
|---|
| 49 | [ 660.824245] Tauros2: Disable L2 prefetch, burst8 and WCO. |
|---|
| 50 | [ 660.824292] Tauros2: CP15 extra feature register: 0x61000000 |
|---|
| 51 | [ 660.824320] Tauros2: L2 cache support initialised in ARMv7 mode. |
|---|
| 52 | [ 660.824346] u2o_phy_init |
|---|
| 53 | [ 660.824730] Bus Clock: USB PLL 480MHz |
|---|
| 54 | [ 660.826058] GC Controller Clock: USB PLL 480MHz |
|---|
| 55 | [ 660.826070] mmp-sram vsram: initialized |
|---|
| 56 | [ 660.831546] bio: create slab <bio-0> at 0 |
|---|
| 57 | [ 660.831807] SCSI subsystem initialized |
|---|
| 58 | [ 660.832317] usbcore: registered new interface driver usbfs |
|---|
| 59 | [ 660.832561] usbcore: registered new interface driver hub |
|---|
| 60 | [ 660.832697] usbcore: registered new device driver usb |
|---|
| 61 | [ 660.832999] i2c-gpio i2c-gpio.7: using pins 109 (SDA) and 108 (SCL) |
|---|
| 62 | [ 660.833116] i2c-gpio i2c-gpio.6: using pins 110 (SDA) and 161 (SCL) |
|---|
| 63 | [ 660.833282] i2c-gpio i2c-gpio.2: using pins 5 (SDA) and 4 (SCL) |
|---|
| 64 | [ 660.833629] I2C: i2c-3: PXA I2C adapter |
|---|
| 65 | [ 660.833629] I2C: i2c-1: PXA I2C adapter |
|---|
| 66 | [ 660.834190] I2C: i2c-0: PXA I2C adapter |
|---|
| 67 | [ 660.834190] I2C: i2c-5: PXA I2C adapter |
|---|
| 68 | [ 660.834467] Advanced Linux Sound Architecture Driver Version 1.0.24. |
|---|
| 69 | [ 660.835382] Switching to clocksource clocksource |
|---|
| 70 | [ 660.838704] Switched to NOHz mode on CPU #0 |
|---|
| 71 | [ 660.838787] cfg80211: Calling CRDA to update world regulatory domain |
|---|
| 72 | [ 660.842386] NET: Registered protocol family 2 |
|---|
| 73 | [ 660.842729] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) |
|---|
| 74 | [ 660.843067] TCP established hash table entries: 16384 (order: 5, 131072 bytes) |
|---|
| 75 | [ 660.843067] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) |
|---|
| 76 | [ 660.843722] TCP: Hash tables configured (established 16384 bind 16384) |
|---|
| 77 | [ 660.843722] TCP reno registered |
|---|
| 78 | [ 660.843752] UDP hash table entries: 256 (order: 0, 4096 bytes) |
|---|
| 79 | [ 660.843775] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) |
|---|
| 80 | [ 660.843818] NET: Registered protocol family 1 |
|---|
| 81 | [ 660.844099] Trying to unpack rootfs image as initramfs... |
|---|
| 82 | [ 660.865607] Freeing initrd memory: 3712K |
|---|
| 83 | [ 660.884702] VFS: Disk quotas dquot_6.5.2 |
|---|
| 84 | [ 660.884702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
|---|
| 85 | [ 660.884795] msgmni has been set to 860 |
|---|
| 86 | [ 660.886011] io scheduler noop registered |
|---|
| 87 | [ 660.886035] io scheduler deadline registered |
|---|
| 88 | [ 660.886069] io scheduler cfq registered (default) |
|---|
| 89 | [ 660.905634] Console: switching to colour frame buffer device 100x40 |
|---|
| 90 | [ 660.915599] pxa2xx-uart.2: ttyS2 at MMIO 0xd4018000 (irq = 24) is a STUART |
|---|
| 91 | [ 661.356296] console [ttyS2] enabled |
|---|
| 92 | [ 661.356309] pxa2xx-uart.3: ttyS3 at MMIO 0xd4016000 (irq = 46) is a HWUART |
|---|
| 93 | [ 661.367569] |
|---|
| 94 | [ 661.367569] [galcore] registerBase =0xd420d000, registerMemSize = 0x0003ffff, contiguousBase= 0x18000000, contiguousSize = 0x03ffffff |
|---|
| 95 | [ 661.386929] |
|---|
| 96 | [ 661.391680] [galcore] real contiguouSize = 0x03ffffff |
|---|
| 97 | [ 661.409598] |
|---|
| 98 | [ 661.409611] [galcore] chipModel=0x860,chipRevision=0x4603,chipFeatures=0xe02c6eed,chipMinorFeatures=0xcbf99fff |
|---|
| 99 | [ 661.439148] brd: module loaded |
|---|
| 100 | [ 661.454875] lis3lv02d: 8 bits sensor found |
|---|
| 101 | [ 661.605582] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0 |
|---|
| 102 | [ 661.621666] OLPC XO-1.75 Embedded Controller driver probed |
|---|
| 103 | [ 661.633695] input: Power Button as /devices/platform/olpc-ec-1.75.0/input/input1 |
|---|
| 104 | [ 661.655266] OLPC board revision 1B1 (EC api 2) |
|---|
| 105 | [ 661.666470] OLPC XO-1.75 lid and ebook switches |
|---|
| 106 | [ 661.677603] input: OLPC lid switch as /devices/virtual/input/input2 |
|---|
| 107 | [ 661.690313] input: OLPC ebook switch as /devices/virtual/input/input3 |
|---|
| 108 | [ 661.703297] usbcore: registered new interface driver ipheth |
|---|
| 109 | [ 661.715726] usbcore: registered new interface driver hwa-rc |
|---|
| 110 | [ 661.727510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
|---|
| 111 | [ 661.740559] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 |
|---|
| 112 | [ 661.740639] pxau2o-ehci pxau2o-ehci.0: pxa9xx ehci |
|---|
| 113 | [ 661.751683] drivers/usb/core/inode.c: creating file 'devices' |
|---|
| 114 | [ 661.751758] drivers/usb/core/inode.c: creating file '001' |
|---|
| 115 | [ 661.751758] pxau2o-ehci pxau2o-ehci.0: new USB bus registered, assigned bus number 1 |
|---|
| 116 | [ 661.766081] pxa9xx_u2o_host_enable: PORTSC 0xc001800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00 |
|---|
| 117 | [ 661.766167] pxau2o-ehci pxau2o-ehci.0: park 0 |
|---|
| 118 | [ 661.766167] pxau2o-ehci pxau2o-ehci.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT |
|---|
| 119 | [ 661.766228] pxau2o-ehci pxau2o-ehci.0: irq 44, io mem 0xd4208000 |
|---|
| 120 | [ 661.778564] pxau2o-ehci pxau2o-ehci.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN |
|---|
| 121 | [ 661.795601] pxau2o-ehci pxau2o-ehci.0: USB 2.0 started, EHCI 1.00 |
|---|
| 122 | [ 661.807897] usb usb1: default language 0x0409 |
|---|
| 123 | [ 661.808054] usb usb1: udev 1, busnum 1, minor = 0 |
|---|
| 124 | [ 661.808068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
|---|
| 125 | [ 661.821126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
|---|
| 126 | [ 661.834669] usb usb1: Product: pxa9xx ehci |
|---|
| 127 | [ 661.845011] usb usb1: Manufacturer: Linux 3.0.0_xo1.75-20111027.1314.olpc.5eff2cf ehci_hcd |
|---|
| 128 | [ 661.859666] usb usb1: SerialNumber: pxau2o-ehci.0 |
|---|
| 129 | [ 661.870769] usb usb1: usb_probe_device |
|---|
| 130 | [ 661.871144] usb usb1: configuration #1 chosen from 1 choice |
|---|
| 131 | [ 661.871203] usb usb1: adding 1-0:1.0 (config #1, interface 0) |
|---|
| 132 | [ 661.871203] hub 1-0:1.0: usb_probe_interface |
|---|
| 133 | [ 661.871316] hub 1-0:1.0: usb_probe_interface - got id |
|---|
| 134 | [ 661.871330] hub 1-0:1.0: USB hub found |
|---|
| 135 | [ 661.881556] hub 1-0:1.0: 1 port detected |
|---|
| 136 | [ 661.891941] hub 1-0:1.0: standalone hub |
|---|
| 137 | [ 661.891941] hub 1-0:1.0: individual port power switching |
|---|
| 138 | [ 661.891953] hub 1-0:1.0: individual port over-current protection |
|---|
| 139 | [ 661.891966] hub 1-0:1.0: Single TT |
|---|
| 140 | [ 661.891992] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) |
|---|
| 141 | [ 661.891992] hub 1-0:1.0: power on to power good time: 20ms |
|---|
| 142 | [ 661.892030] hub 1-0:1.0: local power source is good |
|---|
| 143 | [ 661.892030] hub 1-0:1.0: enabling power on all ports |
|---|
| 144 | [ 661.892044] drivers/usb/core/inode.c: creating file '001' |
|---|
| 145 | [ 661.892548] usbcore: registered new interface driver wusb-cbaf |
|---|
| 146 | [ 661.904994] Initializing USB Mass Storage driver... |
|---|
| 147 | [ 661.916279] usbcore: registered new interface driver usb-storage |
|---|
| 148 | [ 661.928806] USB Mass Storage support registered. |
|---|
| 149 | [ 661.939866] usbcore: registered new interface driver libusual |
|---|
| 150 | [ 661.952024] usbcore: registered new interface driver mdc800 |
|---|
| 151 | [ 661.963737] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera |
|---|
| 152 | [ 661.977564] usbcore: registered new interface driver usbserial |
|---|
| 153 | [ 661.989811] pxau2o-ehci pxau2o-ehci.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT |
|---|
| 154 | [ 661.989811] hub 1-0:1.0: port 1: status 0101 change 0001 |
|---|
| 155 | [ 661.989910] USB Serial support registered for generic |
|---|
| 156 | [ 662.001177] usbcore: registered new interface driver usbserial_generic |
|---|
| 157 | [ 662.014072] usbserial: USB Serial Driver core |
|---|
| 158 | [ 662.025601] RAYDIUM_init |
|---|
| 159 | [ 662.034185] RAYDIUM_i2c_probe, i2c new style format |
|---|
| 160 | [ 662.045069] i2c-core: driver [raydium_ts] using legacy suspend method |
|---|
| 161 | [ 662.057676] i2c-core: driver [raydium_ts] using legacy resume method |
|---|
| 162 | [ 662.069974] RAYDIUM_i2c_register_device, add i2c device, success |
|---|
| 163 | [ 662.081830] RAYDIUM_i2c_register_device, client.addr: 0x30 |
|---|
| 164 | [ 662.093104] RAYDIUM_i2c_register_device, client.adapter: 0xDC008420 |
|---|
| 165 | [ 662.105013] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 |
|---|
| 166 | [ 662.105031] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s |
|---|
| 167 | [ 662.105111] RAYDIUM_i2c_register_device, client.driver: 0xC04CACC0 |
|---|
| 168 | [ 662.143515] input: AT Translated Set 2 keyboard as /devices/platform/olpc-kbd.0/serio0/input/input4 |
|---|
| 169 | [ 662.215582] usb 1-1: new high speed USB device number 2 using pxau2o-ehci |
|---|
| 170 | [ 662.376743] usb 1-1: default language 0x0409 |
|---|
| 171 | [ 662.377103] usb 1-1: udev 2, busnum 1, minor = 1 |
|---|
| 172 | [ 662.377116] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 |
|---|
| 173 | [ 662.389791] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
|---|
| 174 | [ 662.402856] usb 1-1: Product: USB2.0 Hub |
|---|
| 175 | [ 662.412592] usb 1-1: usb_probe_device |
|---|
| 176 | [ 662.412893] usb 1-1: configuration #1 chosen from 1 choice |
|---|
| 177 | [ 662.413298] usb 1-1: adding 1-1:1.0 (config #1, interface 0) |
|---|
| 178 | [ 662.413416] hub 1-1:1.0: usb_probe_interface |
|---|
| 179 | [ 662.413416] hub 1-1:1.0: usb_probe_interface - got id |
|---|
| 180 | [ 662.413430] hub 1-1:1.0: USB hub found |
|---|
| 181 | [ 662.423350] hub 1-1:1.0: 4 ports detected |
|---|
| 182 | [ 662.433062] hub 1-1:1.0: standalone hub |
|---|
| 183 | [ 662.433075] hub 1-1:1.0: ganged power switching |
|---|
| 184 | [ 662.433098] hub 1-1:1.0: global over-current protection |
|---|
| 185 | [ 662.433110] hub 1-1:1.0: Single TT |
|---|
| 186 | [ 662.433122] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns) |
|---|
| 187 | [ 662.433136] hub 1-1:1.0: Port indicators are supported |
|---|
| 188 | [ 662.433148] hub 1-1:1.0: power on to power good time: 100ms |
|---|
| 189 | [ 662.433602] hub 1-1:1.0: local power source is good |
|---|
| 190 | [ 662.433626] hub 1-1:1.0: no over-current condition exists |
|---|
| 191 | [ 662.433626] hub 1-1:1.0: enabling power on all ports |
|---|
| 192 | [ 662.434942] drivers/usb/core/inode.c: creating file '002' |
|---|
| 193 | [ 662.435045] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 |
|---|
| 194 | [ 662.526726] usb 1-1: link qh256-0001/dcfd3960 start 1 [1/0 us] |
|---|
| 195 | [ 662.526780] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 |
|---|
| 196 | [ 664.155580] RAYDIUM_i2c_read, i2c read error, ret -121 |
|---|
| 197 | [ 664.166532] input: raydium_ts as /devices/platform/pxa2xx-i2c.3/i2c-3/3-0030/input/input5 |
|---|
| 198 | [ 664.181067] RAYDIUM_i2c_register_device, register input device, success |
|---|
| 199 | [ 664.193765] RAYDIUM_i2c_register_device, request irq, success |
|---|
| 200 | [ 664.205577] mmp-rtc mmp-rtc: rtc core: registered mmp-rtc as rtc0 |
|---|
| 201 | [ 664.218965] rtc_idt1338 1-0068: rtc core: registered rtc_idt1338 as rtc1 |
|---|
| 202 | [ 664.231675] lirc_dev: IR Remote Control driver registered, major 252 |
|---|
| 203 | [ 664.244107] IR RC5 (streamzap) protocol handler initialized |
|---|
| 204 | [ 664.255628] IR LIRC bridge handler initialized |
|---|
| 205 | [ 664.265976] Linux video capture interface: v2.00 |
|---|
| 206 | [ 664.407961] sdhci: Secure Digital Host Controller Interface driver |
|---|
| 207 | [ 664.420099] sdhci: Copyright(c) Pierre Ossman |
|---|
| 208 | [ 664.430462] mmc0: no vmmc regulator found |
|---|
| 209 | [ 664.440550] mmc0: SDHCI controller on MMC [sdhci-pxa.0] using DMA |
|---|
| 210 | [ 664.452762] mmc1: no vmmc regulator found |
|---|
| 211 | [ 664.462832] mmc1: SDHCI controller on MMC [sdhci-pxa.1] using DMA |
|---|
| 212 | [ 664.474879] mmc2: no vmmc regulator found |
|---|
| 213 | [ 664.484900] mmc2: SDHCI controller on MMC [sdhci-pxa.2] using DMA |
|---|
| 214 | [ 664.497278] usbcore: registered new interface driver usbhid |
|---|
| 215 | [ 664.509800] usbhid: USB HID core driver |
|---|
| 216 | [ 664.521511] i2c-core: driver [olpc_dcon] using legacy suspend method |
|---|
| 217 | [ 664.533880] i2c-core: driver [olpc_dcon] using legacy resume method |
|---|
| 218 | [ 664.547636] olpc-dcon: Discovered DCON version 2 |
|---|
| 219 | [ 664.570803] usbcore: registered new interface driver snd-usb-audio |
|---|
| 220 | [ 664.688116] asoc: alc5631-hifi <-> mmp2-i2s.0 mapping ok |
|---|
| 221 | [ 664.699643] input: OLPC XO-1.75 Headphone Jack as /devices/platform/soc-audio/sound/card0/input6 |
|---|
| 222 | [ 664.715587] input: OLPC XO-1.75 Microphone Jack as /devices/platform/soc-audio/sound/card0/input7 |
|---|
| 223 | [ 664.732181] ALSA device list: |
|---|
| 224 | [ 664.743890] #0: OLPC XO-1.75 |
|---|
| 225 | [ 664.752982] TCP bic registered |
|---|
| 226 | [ 664.762193] Initializing XFRM netlink socket |
|---|
| 227 | [ 664.772328] NET: Registered protocol family 10 |
|---|
| 228 | [ 664.782751] hub 1-1:1.0: hub_suspend |
|---|
| 229 | [ 664.782787] usb 1-1: unlink qh256-0001/dcfd3960 start 1 [1/0 us] |
|---|
| 230 | [ 664.783226] usb 1-1: usb auto-suspend |
|---|
| 231 | [ 664.783637] NET: Registered protocol family 17 |
|---|
| 232 | [ 664.793961] lib80211: common routines for IEEE802.11 drivers |
|---|
| 233 | [ 664.805884] lib80211_crypt: registered algorithm 'NULL' |
|---|
| 234 | [ 664.805884] Registering the dns_resolver key type |
|---|
| 235 | [ 664.816529] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 5 |
|---|
| 236 | [ 664.830270] ThumbEE CPU extension supported. |
|---|
| 237 | [ 664.840461] Registering SWP/SWPB emulation handler |
|---|
| 238 | [ 664.851112] PJ4 iWMMXt coprocessor enabled. |
|---|
| 239 | [ 664.861566] mmp-rtc mmp-rtc: setting system clock to 1970-01-01 00:00:00 UTC (0) |
|---|
| 240 | [ 664.875185] Freeing init memory: 136K |
|---|
| 241 | [ 664.918358] mmc1: new SDIO card at address 0001 |
|---|
| 242 | [ 664.965950] udev[45]: starting version 161 |
|---|
| 243 | [ 665.041883] mmc2: new high speed DDR MMC card at address 0001 |
|---|
| 244 | [ 665.062721] mmcblk0: mmc2:0001 SEM04G 3.68 GiB |
|---|
| 245 | [ 665.073420] mmcblk0boot0: mmc2:0001 SEM04G partition 1 1.00 MiB |
|---|
| 246 | [ 665.085303] mmcblk0boot1: mmc2:0001 SEM04G partition 2 1.00 MiB |
|---|
| 247 | [ 665.102165] mmcblk0: p1 p2 |
|---|
| 248 | [ 665.113220] mmcblk0boot1: unknown partition table |
|---|
| 249 | [ 665.125896] mmcblk0boot0: unknown partition table |
|---|
| 250 | [ 666.433734] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities |
|---|
| 251 | [ 666.456385] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities |
|---|
| 252 | [ 666.481128] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) |
|---|
| 253 | [ 666.505656] dracut: Mounted root filesystem /dev/disk/mmc/mmc2p2 |
|---|
| 254 | [ 666.526298] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered |
|---|
| 255 | [ 666.548215] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities |
|---|
| 256 | [ 666.566730] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem |
|---|
| 257 | [ 666.584661] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: |
|---|
| 258 | [ 666.805586] hub 1-0:1.0: hub_suspend |
|---|
| 259 | [ 666.805615] usb usb1: bus auto-suspend |
|---|
| 260 | [ 666.805648] pxau2o-ehci pxau2o-ehci.0: suspend root hub |
|---|
| 261 | [ 667.033354] dcon_freeze_store: 0 |
|---|
| 262 | [ 667.037058] dcon_source_switch to CPU |
|---|
| 263 | [ 667.069224] olpc-dcon: The CPU has control |
|---|
| 264 | [ 667.378739] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered |
|---|
| 265 | [ 667.462305] dracut: Switching root |
|---|
| 266 | [ 668.108904] udev[204]: starting version 161 |
|---|
| 267 | [ 668.435396] mousedev: PS/2 mouse device common for all mice |
|---|
| 268 | [ 669.021604] psmouse serio1: ID: 10 02 64 |
|---|
| 269 | [ 669.133231] libertas_sdio: Libertas SDIO driver |
|---|
| 270 | [ 669.256019] libertas_sdio: Copyright Pierre Ossman |
|---|
| 271 | [ 669.268818] Finger Sensing Pad, hw: 6.4.1, sw: 1.0.0-K, buttons: 4 |
|---|
| 272 | [ 669.287292] ov7670 7-0021: chip found @ 0x42 (i2c-gpio7) |
|---|
| 273 | [ 669.685607] mmp-camera mmp-camera.0: Release, 0 frames, 0 singles, 0 delivered |
|---|
| 274 | [ 669.972845] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/olpc-kbd.0/serio1/input/input8 |
|---|
| 275 | [ 670.666162] libertas_sdio mmc1:0001:1: (unregistered net_device): 20:7c:8f:6d:65:97, fw 9.70.3p36, cap 0x000003a3 |
|---|
| 276 | [ 670.700019] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter |
|---|
| 277 | [ 670.733549] udev[207]: renamed network interface wlan0 to eth0 |
|---|
| 278 | [ 671.851110] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) |
|---|
