Opened 3 years ago

Closed 2 years ago

#12072 closed defect (fixed)

XO4 - OFW Q7A09 rtc/accelerometer/audio menu test fail

Reported by: chia-hsiu Owned by: wmb@…
Priority: high Milestone: Not Triaged
Component: ofw - open firmware Version: 4-A2
Keywords: Cc:
Blocked By: Blocking:
Deployments affected: Action Needed: no action
Verified: no


CL4 A2 board Q7A09

  1. No selftest method for /rtc
  2. No selftest method for /accelerometer
  3. diag-mode audio test halt

Change History (5)

comment:1 Changed 3 years ago by chia-hsiu

  • Component changed from not assigned to ofw - open firmware
  • Owner set to wmb@…
  • Priority changed from normal to high
  • Version changed from not specified to 4-A2

add more information about audio test

  1. 1 to test-station diag-mode test /audio

Sound suddenly appear after about 4 mins
test with fixture, result: Pass

  1. 5 to test-station diag-mode test /audio

Sound suddenly appear after about 17 mins
test without fixture, result: right channel Fail

comment:2 Changed 3 years ago by chia-hsiu

  1. RTC

Q7A05 - pass, Q7A06~09 - fail
use below command can test

test /i2c@d4031000/rtc

  1. accelerometer

Q7A08 - pass, Q7A09 - fail

comment:3 Changed 3 years ago by Quozl

For accelerometer, the device name has changed.

Also the stand-init probe of the accelerometer, to support both chip types, is not being run, because it relies on a device name of /accelerometer.

For the moment, you can test with:

" /twsi/accelerometer@6,19" " probe" execute-device-method drop
test /twsi/accelerometer@6,19

comment:4 Changed 3 years ago by wmb@…

This is fixed in svn, will be deployed in Q7A10.

comment:5 Changed 2 years ago by Quozl

  • Action Needed changed from never set to no action
  • Resolution set to fixed
  • Status changed from new to closed

These three tests now run in Q7A12.

Note: See TracTickets for help on using tickets.