Ticket #1226 (closed defect: fixed)

Opened 7 years ago

Last modified 7 years ago

network view rollovers at bottom of screen fall off

Reported by: sj Owned by: marco
Priority: high Milestone: Trial-2
Component: sugar Version:
Keywords: Cc:
Action Needed: Verified: no
Deployments affected: Blocked By:
Blocking:

Description

When hovering over a mesh node at the bottom of the screen in the mesh view, the rollover text shows up below the icon selected, which means it falls off and can't readily be read.

Change History

Changed 7 years ago by jg

  • priority changed from normal to high
  • milestone changed from Untriaged to BTest-3

Important, but we've bigger fish to fry in the very short term, I expect.

Changed 7 years ago by marco

  • verified unset
  • milestone changed from BTest-4 to Trial-2

Changed 7 years ago by marco

  • owner changed from dcbw to edsiper

Changed 7 years ago by jg

  • owner changed from edsiper to marco

Changed 7 years ago by marco

  • status changed from new to closed
  • resolution set to fixed

Should be fixed

Changed 7 years ago by kimquirk

  • status changed from closed to reopened
  • resolution deleted

Not fixed in 486. Two things: 1) XOs, APs and Mesh icons may end up on top of each other; and 2) many items are too close to the edge of the screen so that you can't read their flyover.

Changed 7 years ago by marco

1 is much better in git, will be in the next build. Not perfect though if there really lots of items though, getting that right is some work.

2 yeah, I know what's the issue there, I'll try to fix it tomorrow.

Changed 7 years ago by marco

  • status changed from reopened to closed
  • resolution set to fixed

Ok so 2 will be fixed in build 489, 1 should be much better but I'll keep #1964 open about it until the algorithm is completed and handles at best also very busy mesh views.

Changed 7 years ago by jfuhrer

As of 532, #2 has become a problem again.

Changed 7 years ago by jfuhrer

  • status changed from closed to reopened
  • resolution deleted

Changed 7 years ago by marco

Was the full rollover out of screen? Or did it go out of screen only when expanded to secondary state?

Changed 7 years ago by jfuhrer

The primary rollover info (the XO's name) always showed up in full; the secondary state was cut off.

Changed 7 years ago by marco

  • status changed from reopened to closed
  • resolution set to fixed

Dup of #2361 for that part.

Closing this as fixed again, since the original fix was not regressed.

Note: See TracTickets for help on using tickets.