[ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.1-00309-g810817e-dirty (dsd@bloom) (gcc version 4.6.2 (crosstool-NG 1.14.1) ) #36 PREEMPT Fri May 4 14:55:17 CST 2012 [ 0.000000] CPU: ARMv7 Processor [560f5815] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: OLPC XO-1.75, model: 1C2 [ 0.000000] Truncating RAM at 00000000-3fffffff to -2f7fffff (vmalloc region overlap). [ 0.000000] cma: platform reserved 75497472 KiB pool for atomic coherent allocations [ 0.000000] cma: CMA: reserved 128 MiB at 24000000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 194560 [ 0.000000] free_area_init_node: node 0, pgdat c051eed0, node_mem_map c0594000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 193040 pages, LIFO batch:31 [ 0.000000] OLPC board revision 1C2 (EC api 4) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193040 [ 0.000000] Kernel command line: console=ttyS2,115200 console=tty0 selinux=0 fbcon=font:SUN12x22 root=/dev/mmcblk0p2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 760MB = 760MB total [ 0.000000] Memory: 629584k/629584k available, 148656k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc04d44c4 (4914 kB) [ 0.000000] .init : 0xc04d5000 - 0xc04f9000 ( 144 kB) [ 0.000000] .data : 0xc04fa000 - 0xc0522960 ( 163 kB) [ 0.000000] .bss : 0xc0522984 - 0xc0593858 ( 452 kB) [ 0.000000] NR_IRQS:320 nr_irqs:320 320 [ 0.000000] sched_clock: 32 bits at 6MHz, resolution 153ns, wraps every 660764ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000829] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) [ 0.040095] pid_max: default: 32768 minimum: 301 [ 0.040174] Mount-cache hash table entries: 512 [ 0.040472] CPU: Testing write buffer coherency: ok [ 0.042331] Setting up static identity map for 0x379450 - 0x3794a8 [ 0.042886] devtmpfs: initialized [ 0.050131] NET: Registered protocol family 16 [ 0.231203] DMA: preallocated 73728 KiB pool for atomic coherent allocations [ 0.233891] Tauros2: Disabling L2 prefetch. [ 0.233957] Tauros2: L2 cache support initialised in ARMv7 mode. [ 0.234032] Wow! Can't register IRQ for DMA [ 0.234781] Bus Clock: USB PLL 480MHz [ 0.234781] GC Controller Clock: USB PLL 480MHz [ 0.234791] gpiochip_add: registered GPIOs 0 to 31 on device: gpio-0 [ 0.235887] gpiochip_add: registered GPIOs 32 to 63 on device: gpio-1 [ 0.235938] gpiochip_add: registered GPIOs 64 to 95 on device: gpio-2 [ 0.235976] gpiochip_add: registered GPIOs 96 to 127 on device: gpio-3 [ 0.236014] gpiochip_add: registered GPIOs 128 to 159 on device: gpio-4 [ 0.236051] gpiochip_add: registered GPIOs 160 to 191 on device: gpio-5 [ 0.240763] bio: create slab at 0 [ 0.241229] SCSI subsystem initialized [ 0.241427] usbcore: registered new interface driver usbfs [ 0.241571] usbcore: registered new interface driver hub [ 0.241780] usbcore: registered new device driver usb [ 0.241821] i2c-gpio i2c-gpio.6: using pins 110 (SDA) and 161 (SCL) [ 0.242117] i2c-gpio i2c-gpio.7: using pins 109 (SDA) and 108 (SCL) [ 0.242239] I2C: i2c-3: PXA I2C adapter [ 0.242583] I2C: i2c-1: PXA I2C adapter [ 0.242863] I2C: i2c-0: PXA I2C adapter [ 0.243416] I2C: i2c-5: PXA I2C adapter [ 0.243416] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.244291] cfg80211: Calling CRDA to update world regulatory domain [ 0.244563] Switching to clocksource clocksource [ 0.252070] NET: Registered protocol family 2 [ 0.252310] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.252310] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.252778] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.254673] TCP: Hash tables configured (established 131072 bind 65536) [ 0.255048] TCP reno registered [ 0.255084] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.255110] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.255160] NET: Registered protocol family 1 [ 0.255378] Trying to unpack rootfs image as initramfs... [ 0.305494] Freeing initrd memory: 4612K [ 0.307240] VFS: Disk quotas dquot_6.5.2 [ 0.307355] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.307966] msgmni has been set to 1494 [ 0.308591] io scheduler noop registered [ 0.308617] io scheduler deadline registered [ 0.308650] io scheduler cfq registered (default) [ 0.337147] Console: switching to colour frame buffer device 100x40 [ 0.348627] [ 0.348701] [galcore] GC Version: GC Ver0.8.0.2905 [ 0.348980] [ 0.348980] [galcore] registerBase =0xd420d000, registerMemSize = 0x00000fff, contiguousBase= 0x00000000, contiguousSize = 0x03ffffff [ 0.348984] [galcore] streamCount = 1 [ 0.354764] [galcore] registerMax = 64 [ 0.354764] [galcore] threadCount = 256 [ 0.364919] [galcore] shaderCoreCount = 1 [ 0.364927] [galcore] vertexCacheSize = 8 [ 0.374939] [galcore] vertexOutputBufferSize = 512 [ 0.374939] [ 0.380056] [galcore] real contiguouSize = 0x03ffffff [ 0.390325] [ 0.390341] [galcore] chipModel=0x860,chipRevision=0x4603,chipFeatures=0xe02c6eed,chipMinorFeatures=0xcbf99fff [ 0.411677] brd: module loaded [ 0.437459] lis3lv02d: 8 bits 3DC sensor found [ 0.524703] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0 [ 0.530573] OLPC XO-1.75 Embedded Controller driver probed [ 0.536337] input: Power Button as /devices/platform/olpc-ec-1.75.0/input/input1 [ 0.554950] input: OLPC OLS notify as /devices/platform/olpc-ols.0/input/input2 [ 0.554950] OLPC Outdoor Light Sensor driver probed [ 0.565999] OLPC XO-1.75 lid and ebook switches [ 0.571675] input: OLPC lid switch as /devices/virtual/input/input3 [ 0.577187] input: OLPC ebook switch as /devices/virtual/input/input4 [ 0.577372] libertas_sdio: Libertas SDIO driver [ 0.588779] libertas_sdio: Copyright Pierre Ossman [ 0.588789] usbcore: registered new interface driver ipheth [ 0.599941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.605562] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 0.605574] pxau2o-ehci pxau2o-ehci.0: pxa9xx ehci [ 0.605645] drivers/usb/core/inode.c: creating file 'devices' [ 0.611173] drivers/usb/core/inode.c: creating file '001' [ 0.611284] pxau2o-ehci pxau2o-ehci.0: new USB bus registered, assigned bus number 1 [ 0.617023] pxa9xx_u2o_host_enable: PORTSC 0xc001800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00 [ 0.619447] pxau2o-ehci pxau2o-ehci.0: park 0 [ 0.619447] pxau2o-ehci pxau2o-ehci.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.619475] pxau2o-ehci pxau2o-ehci.0: irq 44, io mem 0xd4208000 [ 0.625255] pxau2o-ehci pxau2o-ehci.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 0.644679] pxau2o-ehci pxau2o-ehci.0: USB 2.0 started, EHCI 1.00 [ 0.644689] usb usb1: default language 0x0409 [ 0.650536] usb usb1: udev 1, busnum 1, minor = 0 [ 0.650536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.656268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.656282] usb usb1: Product: pxa9xx ehci [ 0.667558] usb usb1: Manufacturer: Linux 3.3.1-00309-g810817e-dirty ehci_hcd [ 0.667568] usb usb1: SerialNumber: pxau2o-ehci.0 [ 0.679377] usb usb1: usb_probe_device [ 0.679377] usb usb1: configuration #1 chosen from 1 choice [ 0.679437] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.679437] hub 1-0:1.0: usb_probe_interface [ 0.679558] hub 1-0:1.0: usb_probe_interface - got id [ 0.679571] hub 1-0:1.0: USB hub found [ 0.685040] hub 1-0:1.0: 1 port detected [ 0.685070] hub 1-0:1.0: standalone hub [ 0.690435] hub 1-0:1.0: individual port power switching [ 0.690446] hub 1-0:1.0: individual port over-current protection [ 0.690459] hub 1-0:1.0: Single TT [ 0.690471] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.690484] hub 1-0:1.0: power on to power good time: 20ms [ 0.690521] hub 1-0:1.0: local power source is good [ 0.690521] hub 1-0:1.0: enabling power on all ports [ 0.690695] drivers/usb/core/inode.c: creating file '001' [ 0.690973] Initializing USB Mass Storage driver... [ 0.696485] usbcore: registered new interface driver usb-storage [ 0.696603] USB Mass Storage support registered. [ 0.708004] usbcore: registered new interface driver libusual [ 0.713870] usbcore: registered new interface driver mdc800 [ 0.719652] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 0.725808] usbcore: registered new interface driver usbserial [ 0.725808] USB Serial support registered for generic [ 0.737811] usbcore: registered new interface driver usbserial_generic [ 0.737873] usbserial: USB Serial Driver core [ 0.749965] OLPC SP keyboard/touchpad driver probed [ 0.758723] input: raydium_ts as /devices/platform/pxa2xx-i2c.3/i2c-3/3-0030/input/input5 [ 0.765283] raydium_i2c_probe, register input device, success [ 0.771341] raydium_i2c_probe, i2c new style format [ 0.771691] mmp-rtc mmp-rtc: rtc core: registered mmp-rtc as rtc0 [ 0.778942] rtc_idt1338 1-0068: rtc core: registered rtc_idt1338 as rtc1 [ 0.785035] Linux video capture interface: v2.00 [ 0.791015] pxau2o-ehci pxau2o-ehci.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.791066] hub 1-0:1.0: port 1: status 0101 change 0001 [ 0.883286] input: AT Translated Set 2 keyboard as /devices/platform/olpc-kbd.0/serio0/input/input6 [ 0.895819] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 0.895839] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 0.999885] sdhci: Secure Digital Host Controller Interface driver [ 1.006062] sdhci: Copyright(c) Pierre Ossman [ 1.006069] Registered led device: mmc0:: [ 1.013555] mmc0: SDHCI controller on sdhci-pxav3.0 [sdhci-pxav3.0] using ADMA [ 1.019883] usb 1-1: new high-speed USB device number 2 using pxau2o-ehci [ 1.026280] Registered led device: mmc1:: [ 1.027659] mmc1: SDHCI controller on sdhci-pxav3.1 [sdhci-pxav3.1] using ADMA [ 1.034085] Registered led device: mmc2:: [ 1.035397] mmc2: SDHCI controller on sdhci-pxav3.2 [sdhci-pxav3.2] using ADMA [ 1.035406] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.048833] Registered led device: storage [ 1.048971] usbcore: registered new interface driver usbhid [ 1.055460] usbhid: USB HID core driver [ 1.061642] i2c-core: driver [olpc_dcon] using legacy suspend method [ 1.068052] i2c-core: driver [olpc_dcon] using legacy resume method [ 1.078187] olpc-dcon: Discovered DCON version 2 [ 1.089667] usbcore: registered new interface driver snd-usb-audio [ 1.096854] write 6a = 52 [ 1.104127] read 6c = aaa0 (cached) [ 1.110231] write 0 = 0 [ 1.117647] read 3c = 0 [ 1.123588] write 3c = a000 (cached) [ 1.175630] usb 1-1: default language 0x0409 [ 1.176005] usb 1-1: udev 2, busnum 1, minor = 1 [ 1.176035] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.176035] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.189201] usb 1-1: Product: USB2.0 Hub [ 1.195504] usb 1-1: usb_probe_device [ 1.195504] usb 1-1: configuration #1 chosen from 1 choice [ 1.195759] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 1.195938] hub 1-1:1.0: usb_probe_interface [ 1.195938] hub 1-1:1.0: usb_probe_interface - got id [ 1.195967] hub 1-1:1.0: USB hub found [ 1.202258] hub 1-1:1.0: 4 ports detected [ 1.208167] hub 1-1:1.0: standalone hub [ 1.208176] hub 1-1:1.0: ganged power switching [ 1.208188] hub 1-1:1.0: global over-current protection [ 1.208200] hub 1-1:1.0: Single TT [ 1.208211] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns) [ 1.208224] hub 1-1:1.0: Port indicators are supported [ 1.208237] hub 1-1:1.0: power on to power good time: 100ms [ 1.208630] hub 1-1:1.0: local power source is good [ 1.208654] hub 1-1:1.0: no over-current condition exists [ 1.208654] hub 1-1:1.0: enabling power on all ports [ 1.209943] drivers/usb/core/inode.c: creating file '002' [ 1.210109] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 1.214661] read 3c = a000 [ 1.220388] write 3c = e000 (cached) [ 1.229629] write 4a = f18 [ 1.236103] read 4a = f18 (cached) [ 1.241705] read 14 = f0f0 [ 1.247096] read 14 = f0f0 [ 1.252258] read 14 = f0f0 [ 1.257209] read 14 = f0f0 [ 1.261979] read 14 = f0f0 [ 1.266596] read 14 = f0f0 [ 1.271126] read 14 = f0f0 [ 1.276341] read 14 = f0f0 [ 1.280261] read 28 = f8f8 [ 1.280360] read 28 = f8f8 [ 1.287727] read 28 = f8f8 [ 1.291132] read 28 = f8f8 [ 1.291144] read 28 = f8f8 [ 1.298522] read 28 = f8f8 [ 1.298534] read 28 = f8f8 [ 1.304349] read 28 = f8f8 [ 1.307103] read 1a = ffc0 [ 1.309709] read 1a = ffc0 [ 1.312137] read 1a = ffc0 [ 1.314515] read 1a = ffc0 [ 1.316779] read 1a = ffc0 [ 1.318838] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.318873] read 1a = ffc0 [ 1.320820] read 1a = ffc0 [ 1.322673] read 1a = ffc0 [ 1.324463] read 1a = ffc0 [ 1.327439] read 1c = ffc0 [ 1.331366] read 1c = ffc0 [ 1.332855] read 1c = ffc0 [ 1.334258] read 1c = ffc0 [ 1.335495] read 1c = ffc0 [ 1.335513] read 1c = ffc0 [ 1.337776] read 1c = ffc0 [ 1.338782] read 1c = ffc0 [ 1.339726] read 1c = ffc0 [ 1.340626] read 2 = 8888 [ 1.341471] read 2 = 8888 [ 1.342290] read 4 = 8080 [ 1.343109] read 4 = 8080 [ 1.343931] read 6 = a080 [ 1.344777] read 6 = a080 [ 1.345608] read 6 = a080 [ 1.346449] read 6 = a080 [ 1.347266] read 4 = 8080 [ 1.348097] read 4 = 8080 [ 1.348934] read 2 = 8888 [ 1.349979] read 2 = 8888 [ 1.349991] read 1e = 88c0 [ 1.352708] read 1e = 88c0 [ 1.353573] read 1e = 88c0 [ 1.353573] read 1e = 88c0 [ 1.355266] read 20 = 88c0 [ 1.355288] read 20 = 88c0 [ 1.356146] read 20 = 88c0 [ 1.356964] read 20 = 88c0 [ 1.358601] read 2a = fc00 [ 1.358601] read 2a = fc00 [ 1.359429] read 2a = fc00 [ 1.361071] read 2a = fc00 [ 1.361902] read 2a = fc00 [ 1.362724] read 2a = fc00 [ 1.362724] read 2c = 4440 [ 1.364369] read 2c = 4440 [ 1.366116] read 2c = 4440 [ 1.366935] read 2c = 4440 [ 1.366935] read 2c = 4440 [ 1.367754] read 2c = 4440 [ 1.368565] read 2c = 4440 [ 1.370165] read 2c = 4440 [ 1.370970] read 2c = 4440 [ 1.371782] read 2c = 4440 [ 1.371782] read 2c = 4440 [ 1.373341] read 2c = 4440 [ 1.373341] read 2c = 4440 [ 1.374868] read 2c = 4440 [ 1.375600] read 2c = 4440 [ 1.376368] rt5631 0-001a: Marking MONO dirty due to new widget [ 1.376368] rt5631 0-001a: Marking HPOR dirty due to new widget [ 1.376401] rt5631 0-001a: Marking HPOL dirty due to new widget [ 1.376420] rt5631 0-001a: Marking SPOR dirty due to new widget [ 1.376456] rt5631 0-001a: Marking SPOL dirty due to new widget [ 1.376456] rt5631 0-001a: Marking AUXO2 dirty due to new widget [ 1.376490] rt5631 0-001a: Marking AUXO1 dirty due to new widget [ 1.376490] read 3a = 0 [ 1.376507] rt5631 0-001a: Marking Class D dirty due to new widget [ 1.377247] read 3c = e000 [ 1.377273] rt5631 0-001a: Marking MONO Depop dirty due to new widget [ 1.378072] rt5631 0-001a: Marking HPR Mux dirty due to new widget [ 1.378099] rt5631 0-001a: Marking HPL Mux dirty due to new widget [ 1.378125] rt5631 0-001a: Marking MONO Mux dirty due to new widget [ 1.378125] rt5631 0-001a: Marking SPOR Mux dirty due to new widget [ 1.378150] rt5631 0-001a: Marking SPOL Mux dirty due to new widget [ 1.378175] read 3c = e000 [ 1.378985] rt5631 0-001a: Marking AXO2MIX Mixer dirty due to new widget [ 1.378985] rt5631 0-001a: Marking SPORMIX Mixer dirty due to new widget [ 1.379020] read 3c = e000 [ 1.379053] rt5631 0-001a: Marking MONOMIX Mixer dirty due to new widget [ 1.379808] rt5631 0-001a: Marking SPOLMIX Mixer dirty due to new widget [ 1.379897] read 3c = e000 [ 1.380638] rt5631 0-001a: Marking AXO1MIX Mixer dirty due to new widget [ 1.380658] rt5631 0-001a: Marking HP Depop dirty due to new widget [ 1.380685] rt5631 0-001a: Marking Right DAC_HP dirty due to new widget [ 1.380685] rt5631 0-001a: Marking Left DAC_HP dirty due to new widget [ 1.380732] read 3e = 0 [ 1.381487] rt5631 0-001a: Marking Right SPKVOL Mux dirty due to new widget [ 1.381487] read 3e = 0 [ 1.381516] rt5631 0-001a: Marking Right HPVOL Mux dirty due to new widget [ 1.382252] read 3e = 0 [ 1.382280] rt5631 0-001a: Marking Right OUTVOL Mux dirty due to new widget [ 1.383039] read 3e = 0 [ 1.383039] rt5631 0-001a: Marking Left OUTVOL Mux dirty due to new widget [ 1.383772] read 3e = 0 [ 1.383800] rt5631 0-001a: Marking Left HPVOL Mux dirty due to new widget [ 1.384542] read 3e = 0 [ 1.385343] rt5631 0-001a: Marking Left SPKVOL Mux dirty due to new widget [ 1.385409] read 3b = 0 [ 1.385409] rt5631 0-001a: Marking SPKMIXR Mixer dirty due to new widget [ 1.386158] read 3b = 0 [ 1.387012] rt5631 0-001a: Marking OUTMIXR Mixer dirty due to new widget [ 1.387012] read 3b = 0 [ 1.387125] rt5631 0-001a: Marking OUTMIXL Mixer dirty due to new widget [ 1.387934] read 3b = 0 [ 1.387934] rt5631 0-001a: Marking SPKMIXL Mixer dirty due to new widget [ 1.388663] read 3a = 0 [ 1.389435] rt5631 0-001a: Marking Right DAC To Mixer dirty due to new widget [ 1.389435] read 3a = 0 [ 1.390196] rt5631 0-001a: Marking Left DAC To Mixer dirty due to new widget [ 1.390196] rt5631 0-001a: Marking Voice DAC Boost dirty due to new widget [ 1.390215] rt5631 0-001a: Marking Voice DAC dirty due to new widget [ 1.390251] read 3a = 0 [ 1.391019] rt5631 0-001a: Marking Right DAC dirty due to new widget [ 1.391028] read 3a = 0 [ 1.391813] rt5631 0-001a: Marking Left DAC dirty due to new widget [ 1.391821] read 3a = 0 [ 1.393647] rt5631 0-001a: Marking DAC REF dirty due to new widget [ 1.393674] read 3a = 0 [ 1.396497] rt5631 0-001a: Marking I2S dirty due to new widget [ 1.396507] read 3a = 0 [ 1.397289] rt5631 0-001a: Marking Right ADC dirty due to new widget [ 1.397289] read 3a = 0 [ 1.398119] rt5631 0-001a: Marking Left ADC dirty due to new widget [ 1.398663] read 4a = f18 (cached) [ 1.398673] rt5631 0-001a: Marking Right ADC Select dirty due to new widget [ 1.400029] read 4a = f18 (cached) [ 1.400880] rt5631 0-001a: Marking Left ADC Select dirty due to new widget [ 1.400911] read 24 = 3000 [ 1.401766] rt5631 0-001a: Marking DMIC Supply dirty due to new widget [ 1.401766] rt5631 0-001a: Marking ADC Mixer dirty due to new widget [ 1.401786] read 3b = 0 [ 1.401851] rt5631 0-001a: Marking RECMIXR Mixer dirty due to new widget [ 1.402781] read 3b = 0 [ 1.403676] rt5631 0-001a: Marking RECMIXL Mixer dirty due to new widget [ 1.403704] rt5631 0-001a: Marking MONO_IN dirty due to new widget [ 1.403704] read 3e = 0 [ 1.404624] rt5631 0-001a: Marking AXIR Boost dirty due to new widget [ 1.404655] read 3e = 0 [ 1.405551] rt5631 0-001a: Marking AXIL Boost dirty due to new widget [ 1.405560] read 3e = 0 [ 1.406474] rt5631 0-001a: Marking MONOIN_RXN Boost dirty due to new widget [ 1.406502] read 3e = 0 [ 1.407404] rt5631 0-001a: Marking MONOIN_RXP Boost dirty due to new widget [ 1.407404] read 3b = 0 [ 1.408331] rt5631 0-001a: Marking MIC2 Boost dirty due to new widget [ 1.408339] read 3b = 0 [ 1.409264] rt5631 0-001a: Marking MIC1 Boost dirty due to new widget [ 1.409273] read 3b = 0 [ 1.410198] rt5631 0-001a: Marking MIC Bias2 dirty due to new widget [ 1.410207] read 3b = 0 [ 1.411127] rt5631 0-001a: Marking MIC Bias1 dirty due to new widget [ 1.411135] rt5631 0-001a: Marking DMIC dirty due to new widget [ 1.411155] rt5631 0-001a: Marking MONOIN_RXP dirty due to new widget [ 1.411192] rt5631 0-001a: Marking MONOIN_RXN dirty due to new widget [ 1.411210] rt5631 0-001a: Marking AXIR dirty due to new widget [ 1.411210] rt5631 0-001a: Marking AXIL dirty due to new widget [ 1.411245] rt5631 0-001a: Marking MIC2 dirty due to new widget [ 1.411245] rt5631 0-001a: Marking MIC1 dirty due to new widget [ 1.411282] read 3b = 0 [ 1.412160] rt5631 0-001a: Marking PLL1 dirty due to new widget [ 1.412706] read 0 = 0 (cached) [ 1.413652] rt5631 0-001a: Marking Vmid dirty due to new widget [ 1.413831] read 1c = ffc0 [ 1.414823] usb 1-1: link qh256-0001/ec8cd200 start 1 [1/0 us] [ 1.414926] hub 1-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 1.414954] read 28 = f8f8 [ 1.415962] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.416026] read 1a = ffc0 [ 1.417086] read 28 = f8f8 [ 1.418112] read 14 = f0f0 [ 1.419177] read 14 = f0f0 [ 1.420202] read 42 = 0 [ 1.421326] read 42 = 0 [ 1.422370] read 42 = 0 [ 1.423391] read 42 = 0 [ 1.424569] read 3b = 0 [ 1.425678] write 3b = c (cached) [ 1.427763] read 0 = 0 (cached) [ 1.428952] write 0 = 1 [ 1.430554] read 3a = 0 [ 1.431776] write 3a = 1000 (cached) [ 1.433504] read 3c = e000 [ 1.434969] write 3c = e100 (cached) [ 1.436907] read 3e = 0 [ 1.438419] write 3e = c00 (cached) [ 1.440430] read 3e = c00 [ 1.442051] write 3e = cc0 (cached) [ 1.444166] read 56 = 8000 [ 1.445881] read 5c = 7e0 [ 1.447578] write 5c = 0 (cached) [ 1.450280] read 4a = 718 (cached) [ 1.452129] write 4a = 718 [ 1.454399] write 6a = 56 [ 1.456770] write 6c = 303e [ 1.459111] read 3c = e100 [ 1.461068] write 3c = e11c (cached) [ 1.463543] write 54 = 8080 (cached) [ 1.467550] mmc1: new SDIO card at address 0001 [ 1.495073] usb 1-1.4: new high-speed USB device number 3 using pxau2o-ehci [ 1.574666] read 3c = e11c [ 1.574679] write 3c = e11e (cached) [ 1.580074] write 5c = 7e0 (cached) [ 1.583060] write 4a = 718 [ 1.586017] read 56 = 8000 [ 1.586028] read 5c = 7e0 [ 1.588584] write 5c = 0 (cached) [ 1.594678] read 4a = 718 (cached) [ 1.594693] write 4a = 718 [ 1.604680] write 6a = 56 [ 1.607881] write 6c = 302f [ 1.611062] write 54 = c003 (cached) [ 1.614361] read 4 = 8080 [ 1.617199] usb 1-1.4: default language 0x0409 [ 1.617217] write 4 = 0 (cached) [ 1.621513] usb 1-1.4: udev 3, busnum 1, minor = 2 [ 1.621542] usb 1-1.4: New USB device found, idVendor=090c, idProduct=1000 [ 1.621542] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.627801] usb 1-1.4: Product: Flash Voyager [ 1.627801] usb 1-1.4: Manufacturer: Corsair [ 1.630945] usb 1-1.4: SerialNumber: A200000000025646 [ 1.637602] usb 1-1.4: usb_probe_device [ 1.637602] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.638020] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.638046] usb-storage 1-1.4:1.0: usb_probe_interface [ 1.638235] usb-storage 1-1.4:1.0: usb_probe_interface - got id [ 1.638417] scsi0 : usb-storage 1-1.4:1.0 [ 1.642169] drivers/usb/core/inode.c: creating file '003' [ 1.784662] write 5c = 7e0 (cached) [ 1.788306] write 4a = 718 [ 1.791883] read 3b = c [ 1.795038] rt5631 0-001a: Marking Headphone Jack dirty due to pin configuration [ 1.795063] rt5631 0-001a: Marking Mic Jack dirty due to pin configuration [ 1.795273] rt5631 0-001a: Marking Headphone Jack dirty due to pin configuration [ 1.795283] rt5631 0-001a: Marking HPOR dirty due to peer state change [ 1.795383] rt5631 0-001a: Marking HPOL dirty due to peer state change [ 1.795398] rt5631 0-001a: Marking HP Depop dirty due to peer state change [ 1.795417] rt5631 0-001a: Marking HPR Mux dirty due to peer state change [ 1.795440] rt5631 0-001a: Marking HPL Mux dirty due to peer state change [ 1.795454] rt5631 0-001a: Marking Right HPVOL Mux dirty due to peer state change [ 1.795473] rt5631 0-001a: Marking Left HPVOL Mux dirty due to peer state change [ 1.795492] rt5631 0-001a: Marking Vmid dirty due to peer state change [ 1.795554] read 56 = 8000 [ 1.795566] read 5c = 7e0 [ 1.798668] write 5c = 0 (cached) [ 1.805884] read 4a = 718 (cached) [ 1.808976] write 4a = 718 [ 1.812430] write 6a = 56 [ 1.815928] write 6c = 302f [ 1.819409] write 54 = c003 (cached) [ 1.822903] read 4 = 0 [ 1.825967] write 4 = 8080 (cached) [ 1.984665] write 5c = 7e0 (cached) [ 1.988147] write 4a = 718 [ 1.991442] read 56 = 8000 [ 1.991451] read 5c = 7e0 [ 1.996914] write 5c = 0 (cached) [ 2.000577] read 4a = 718 (cached) [ 2.000586] write 4a = 718 [ 2.006670] write 6a = 56 [ 2.009861] write 6c = 303f [ 2.013008] write 54 = c030 (cached) [ 2.104826] write 54 = 8030 (cached) [ 2.107956] read 3c = e11e [ 2.107956] write 3c = e11c (cached) [ 2.113857] write 54 = 80b0 (cached) [ 2.204778] write 54 = 8000 (cached) [ 2.207888] read 3c = e11c [ 2.207898] write 3c = e100 (cached) [ 2.213571] write 5c = 7e0 (cached) [ 2.216537] write 4a = 718 [ 2.219318] read 3e = cc0 [ 2.219332] write 3e = c0 (cached) [ 2.224499] rt5631 0-001a: Marking Mic Jack dirty due to pin configuration [ 2.224654] asoc: rt5631-hifi <-> mmp2-i2s.0 mapping ok [ 2.227711] input: OLPC XO-1.75 Headphone Jack as /devices/platform/soc-audio/sound/card0/input7 [ 2.230821] input: OLPC XO-1.75 Mic Jack as /devices/platform/soc-audio/sound/card0/input8 [ 2.234296] ALSA device list: [ 2.237177] #0: OLPC XO-1.75 [ 2.237189] TCP bic registered [ 2.240340] Initializing XFRM netlink socket [ 2.246276] NET: Registered protocol family 10 [ 2.250013] NET: Registered protocol family 17 [ 2.250013] lib80211: common routines for IEEE802.11 drivers [ 2.256183] lib80211_crypt: registered algorithm 'NULL' [ 2.256183] Registering the dns_resolver key type [ 2.256196] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 5 [ 2.259430] ThumbEE CPU extension supported. [ 2.266364] PJ4 iWMMXt coprocessor enabled. [ 2.271449] rtc_idt1338 1-0068: setting system clock to 2012-05-04 20:57:57 UTC (1336165077) [ 2.275517] Freeing init memory: 144K [ 2.354676] dracut: dracut-017-62.git20120322.fc17 [ 2.387315] udevd[59]: starting version 181 [ 2.636927] scsi 0:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS [ 2.648674] sd 0:0:0:0: [sda] 3932160 512-byte logical blocks: (2.01 GB/1.87 GiB) [ 2.656389] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.666426] sd 0:0:0:0: [sda] Write Protect is off [ 2.672888] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 2.673662] sd 0:0:0:0: [sda] No Caching mode page present [ 2.680121] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 2.691795] sd 0:0:0:0: [sda] No Caching mode page present [ 2.698201] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 2.761765] sda: sda1 [ 2.774931] sd 0:0:0:0: [sda] No Caching mode page present [ 2.786105] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 2.786105] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.115286] libertas_sdio mmc1:0001:1: (unregistered net_device): 20:7c:8f:74:33:ed, fw 9.70.20p0, cap 0x000003a3 [ 4.135207] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter [ 4.144688] udevd[80]: renamed network interface wlan0 to eth0 [ 4.290121] mmc2: new high speed DDR MMC card at address 0001 [ 4.298938] mmcblk0: mmc2:0001 008G4B 7.40 GiB [ 4.305797] mmcblk0boot0: mmc2:0001 008G4B partition 1 2.00 MiB [ 4.312522] mmcblk0boot1: mmc2:0001 008G4B partition 2 2.00 MiB [ 4.321128] mmcblk0: p1 p2 [ 4.334143] mmcblk0boot1: unknown partition table [ 4.344760] mmcblk0boot0: unknown partition table [ 4.624781] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.624956] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.690003] EXT4-fs (mmcblk0p2): recovery complete [ 4.699798] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.725361] dracut: Remounting /dev/mmcblk0p2 with -o ro [ 4.739495] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.759388] dracut: Mounted root filesystem /dev/mmcblk0p2 [ 4.777356] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered [ 4.790179] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 4.804998] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem [ 4.813766] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) [ 4.886189] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered [ 4.960448] dracut: Switching root [ 5.726006] udevd[190]: starting version 182 [ 5.925387] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 7.680451] udevd[207]: renamed network interface eth0 to eth1 [ 8.680187] read 2 = 8888 [ 8.807025] write 2 = 9696 (cached) [ 8.814966] read 2 = 9696 [ 8.815274] write 2 = 1616 (cached) [ 9.000405] read 10 = 0 [ 9.001978] write 10 = 606 (cached) [ 9.105147] read c = 0 [ 9.108980] read e = 0 [ 9.109264] read 22 = 0 [ 9.109264] write 22 = 7000 (cached) [ 9.196580] read e = 0 [ 9.196708] read 22 = 7000 [ 9.197037] write 22 = 7700 (cached) [ 9.224815] read 26 = 8808 [ 9.225180] read 26 = 8808 [ 9.225529] write 26 = 8404 (cached) [ 9.228278] read a = 808 [ 9.228525] write a = 0 (cached) [ 9.236240] read 6 = a080 [ 9.236677] read 6 = a080 [ 9.236677] read 2 = 1616 [ 9.236939] write 2 = 5656 (cached) [ 9.265194] read 2 = 5656 [ 9.270156] read 2 = 5656 [ 9.270477] write 2 = 4040 (cached) [ 9.274886] read 6 = a080 [ 9.275072] read 4 = 8080 [ 9.275072] read 4 = 8080 [ 9.275377] read 24 = 3000 [ 9.275553] read 40 = e00 [ 9.275832] write 40 = 4e00 (cached) [ 9.318702] read 2c = 4440 [ 9.318783] read 2c = 4440 [ 9.319130] read 2c = 4440 [ 9.319130] rt5631 0-001a: Marking MONO_IN dirty due to mux disconnection [ 9.319264] rt5631 0-001a: Marking MONOMIX Mixer dirty due to mux connection [ 9.319319] rt5631 0-001a: Marking MONO Mux dirty due to mux change [ 9.319319] rt5631 0-001a: Marking MONO dirty due to peer state change [ 9.319392] rt5631 0-001a: Marking MONO Depop dirty due to peer state change [ 9.354768] read 3c = e100 [ 9.354800] write 3c = e000 (cached) [ 9.356647] read 2c = 4440 [ 9.356647] write 2c = 4400 (cached) [ 9.463565] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.528129] read 2c = 4400 [ 9.534812] rt5631 0-001a: Marking MONO_IN dirty due to mux disconnection [ 9.534833] rt5631 0-001a: Marking SPORMIX Mixer dirty due to mux connection [ 9.534871] rt5631 0-001a: Marking SPOR Mux dirty due to mux change [ 9.534871] rt5631 0-001a: Marking SPOR dirty due to peer state change [ 9.534923] rt5631 0-001a: Marking Class D dirty due to peer state change [ 9.612402] read 2c = 4400 [ 9.730066] write 2c = 4000 (cached) [ 9.761358] read 2c = 4000 [ 9.768331] rt5631 0-001a: Marking MONO_IN dirty due to mux disconnection [ 9.768378] rt5631 0-001a: Marking SPOLMIX Mixer dirty due to mux connection [ 9.768440] rt5631 0-001a: Marking SPOL Mux dirty due to mux change [ 9.768440] rt5631 0-001a: Marking MONOIN_RXN Boost dirty due to peer state change [ 9.768484] rt5631 0-001a: Marking MONOIN_RXP Boost dirty due to peer state change [ 9.768500] rt5631 0-001a: Marking SPOL dirty due to peer state change [ 9.768525] rt5631 0-001a: Marking MONOIN_RXN dirty due to peer state change [ 9.768544] rt5631 0-001a: Marking MONOIN_RXP dirty due to peer state change [ 9.768562] rt5631 0-001a: Marking Class D dirty due to peer state change [ 9.784780] read 3e = c0 [ 9.791099] write 3e = 0 (cached) [ 9.814766] read 3a = 1000 [ 9.817856] write 3a = 0 (cached) [ 9.994812] read 2c = 4000 [ 9.994850] write 2c = 0 (cached) [ 10.125539] read 20 = 88c0 [ 10.131424] read 20 = 88c0 [ 10.269247] read 20 = 88c0 [ 10.269366] read 20 = 88c0 [ 10.287559] read 2a = fc00 [ 10.287681] read 2a = fc00 [ 10.293795] rt5631 0-001a: Marking Right SPKVOL Mux dirty due to mixer connection [ 10.293795] rt5631 0-001a: Marking SPORMIX Mixer dirty due to mixer update [ 10.293882] rt5631 0-001a: Marking SPOR Mux dirty due to peer state change [ 10.293882] rt5631 0-001a: Marking SPOR dirty due to peer state change [ 10.293902] rt5631 0-001a: Marking Class D dirty due to peer state change [ 10.304968] read 2a = fc00 [ 10.308388] write 2a = ec00 (cached) [ 10.311780] read 3a = 0 [ 10.324793] write 3a = 1000 (cached) [ 10.328301] read 3e = 0 [ 10.328334] write 3e = 4000 (cached) [ 10.342163] read 2a = ec00 [ 10.354883] read 2a = ec00 [ 10.354883] read 2a = ec00 [ 10.361227] rt5631 0-001a: Marking Left SPKVOL Mux dirty due to mixer connection [ 10.361227] rt5631 0-001a: Marking SPOLMIX Mixer dirty due to mixer update [ 10.361314] rt5631 0-001a: Marking SPOL Mux dirty due to peer state change [ 10.361314] rt5631 0-001a: Marking SPOL dirty due to peer state change [ 10.365087] read 2a = ec00 [ 10.374727] write 2a = 6c00 (cached) [ 10.378320] read 3e = 4000 [ 10.381420] write 3e = c000 (cached) [ 10.385038] read 2a = 6c00 [ 10.385144] read 1e = 88c0 [ 10.391561] read 1e = 88c0 [ 10.404685] read 1e = 88c0 [ 10.407901] read 1e = 88c0 [ 10.410851] read 2 = 4040 [ 10.413726] read 4 = 8080 [ 10.434694] rt5631 0-001a: Marking Vmid dirty due to mux disconnection [ 10.434763] rt5631 0-001a: Marking OUTMIXR Mixer dirty due to mux connection [ 10.434763] rt5631 0-001a: Marking Right HPVOL Mux dirty due to mux change [ 10.434910] read 4 = 8080 [ 10.437594] write 4 = 80c0 (cached) [ 10.440631] read 6 = a080 [ 10.440739] read 6 = a080 [ 10.454807] read 4 = 80c0 [ 10.454807] rt5631 0-001a: Marking Vmid dirty due to mux disconnection [ 10.457276] rt5631 0-001a: Marking OUTMIXL Mixer dirty due to mux connection [ 10.457276] rt5631 0-001a: Marking Left HPVOL Mux dirty due to mux change [ 10.457412] read 4 = 80c0 [ 10.457423] write 4 = c0c0 (cached) [ 10.462485] read 2 = 4040 [ 10.464923] read 28 = f8f8 [ 10.465090] read 28 = f8f8 [ 10.467402] rt5631 0-001a: Marking Right DAC dirty due to mixer connection [ 10.469627] rt5631 0-001a: Marking SPKMIXR Mixer dirty due to mixer update [ 10.474753] read 28 = f8f8 [ 10.474753] write 28 = f8d8 (cached) [ 10.484750] read 28 = f8d8 [ 10.484856] read 28 = f8d8 [ 10.487060] read 1c = ffc0 [ 10.489093] read 1c = ffc0 [ 10.493162] read 1c = ffc0 [ 10.504685] read 1c = ffc0 [ 10.504782] read 1c = ffc0 [ 10.506894] read 1c = ffc0 [ 10.510948] read 1c = ffc0 [ 10.512898] rt5631 0-001a: Marking Right DAC dirty due to mixer connection [ 10.512898] rt5631 0-001a: Marking OUTMIXR Mixer dirty due to mixer update [ 10.523337] read 1c = ffc0 [ 10.525500] write 1c = dfc0 (cached) [ 10.527859] read 1c = dfc0 [ 10.527962] read 1c = dfc0 [ 10.531721] read 1a = ffc0 [ 10.531721] read 1a = ffc0 [ 10.540804] read 1a = ffc0 [ 10.542714] rt5631 0-001a: Marking Left DAC dirty due to mixer connection [ 10.542747] rt5631 0-001a: Marking OUTMIXL Mixer dirty due to mixer update [ 10.542884] read 1a = ffc0 [ 10.545747] write 1a = dfc0 (cached) [ 10.552058] read 1a = dfc0 [ 10.554962] read 1a = dfc0 [ 10.557789] read 1a = dfc0 [ 10.557842] read 1a = dfc0 [ 10.559500] read 1a = dfc0 [ 10.561129] read 1a = dfc0 [ 10.562750] read 28 = f8d8 [ 10.575626] read 28 = f8d8 [ 10.577423] read 28 = f8d8 [ 10.577423] rt5631 0-001a: Marking Left DAC dirty due to mixer connection [ 10.579052] rt5631 0-001a: Marking SPKMIXL Mixer dirty due to mixer update [ 10.584731] read 28 = f8d8 [ 10.584748] write 28 = d8d8 (cached) [ 10.588429] read 28 = d8d8 [ 10.588520] read 14 = f0f0 [ 10.590149] read 14 = f0f0 [ 10.591775] read 14 = f0f0 [ 10.602471] rt5631 0-001a: Marking MIC2 Boost dirty due to mixer connection [ 10.602512] rt5631 0-001a: Marking RECMIXR Mixer dirty due to mixer update [ 10.614769] read 14 = f0f0 [ 10.616439] write 14 = f0b0 (cached) [ 10.618492] read 14 = f0b0 [ 10.620223] read 14 = f0b0 [ 10.621854] read 14 = f0b0 [ 10.623502] rt5631 0-001a: Marking MIC1 Boost dirty due to mixer connection [ 10.623521] rt5631 0-001a: Marking RECMIXL Mixer dirty due to mixer update [ 10.634734] read 14 = f0b0 [ 10.636338] write 14 = b0b0 (cached) [ 10.638322] read 14 = b0b0 [ 10.638427] read 14 = b0b0 [ 32.211477] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 41.058876] dcon_freeze_store: 0 [ 42.434664] eth1: no IPv6 routers present [ 56.690982] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010 [ 56.691640] hub 1-1:1.0: port 4, status 0100, change 0001, 12 Mb/s [ 56.692015] usb 1-1.4: USB disconnect, device number 3 [ 56.692029] usb 1-1.4: unregistering device [ 56.694211] usb 1-1.4: unregistering interface 1-1.4:1.0 [ 56.698176] usb 1-1.4: usb_disable_device nuking all URBs [ 56.855063] hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x100 [ 58.507534] write 34 = 8000 (cached) [ 58.510197] read 34 = 8000 [ 58.510230] write 38 = 1000 (cached) [ 58.516036] rt5631 0-001a: widget Voice DAC [ 58.516187] Voice DAC Mono Playback stream HIFI Playback event 1 [ 58.516215] rt5631 0-001a: widget Right DAC [ 58.516215] HIFI Playback stream HIFI Playback event 1 [ 58.516222] rt5631 0-001a: Marking Right DAC dirty due to stream event [ 58.516237] rt5631 0-001a: widget Left DAC [ 58.516253] HIFI Playback stream HIFI Playback event 1 [ 58.516259] rt5631 0-001a: Marking Left DAC dirty due to stream event [ 58.516273] rt5631 0-001a: widget Right ADC [ 58.516289] HIFI Capture stream HIFI Playback event 1 [ 58.516295] rt5631 0-001a: widget Left ADC [ 58.516310] HIFI Capture stream HIFI Playback event 1 [ 59.044673] hub 1-1:1.0: hub_suspend [ 59.044736] usb 1-1: unlink qh256-0001/ec8cd200 start 1 [1/0 us] [ 59.045142] usb 1-1: usb auto-suspend, wakeup 1 [ 61.064724] hub 1-0:1.0: hub_suspend [ 61.064756] usb usb1: bus auto-suspend, wakeup 1 [ 61.064793] pxau2o-ehci pxau2o-ehci.0: suspend root hub [ 61.962771] olpc-ec-1.75: got event 04